gongjigongyi.com

与米乐m6网页版登录入口代表实时聊天。 工作时间:上午 9:00 - 下午 5:00(太平洋标准时间)。

电话

致电我们

工作时间:上午9:00-下午5:00(太平洋标准时间)

下载

下载手册、产品技术资料、软件等:

下载类型
型号或关键字

反馈

How can I measure hall mobility of 2D materials?

问题:

How can I measure hall mobility of 2D materials?

答案:

Hall mobility, or electron mobility, of a 2D material is best measured by utilizing the Hall effect. There are several different Keithley solutions for making Hall effect measurements. A Keithley 4200A-SCS Parameter Analyzer with 4 Source Measure Units (SMUs) can be a suitable solution for low doped semiconductor materials. The 4200A-SCS allows for the van der Pauw resistivity measurement method to be utilized, as the device under test can be connected to SMUs at its four corners. Of course, 4 individual SMUs like the 2450 SMU can be used instead of the 4200A-SCS if you're willing to do the math required to extract mobility yourself. 

Another potential method for measuring the hall mobility of your 2D material is using the 3765 Hall Effect Card which was specifically designed for this purpose. This module achieves similar functionality to the previously described setup by buffering the 4 desired measurement points on the device under test. A DAQ6510 equipped with a 7709 6x8 Matrix Card and a 6220 Current Source also allows for a similar measurement process.


常见问题 ID 71221

查看所有常见问题 »