Do the existing MSO/DPO/MDO4000/B Series application modules work with the MDO4000C?

Yes, almost all work from all legacy MSO/DPO/MDO4000/B series scopes. The only one that has some requirements is the MDO4TRIG which requires a spectrum analyzer option MDO4SA3 or MDO4SA6 be installed on your MDO4000C before RF triggering capabilities would work. Otherwise all modules are compatible on this new oscilloscope. |

Note: MSO/DPO/MDO3000 Series modules are not compatible on the 4000 Series. 

Note 2: ≥350 MHz bandwidth models are recommended for 100BASE-TX; USB high-speed supported only on models with 1 GHz analog channel bandwidth.

For further questions, please reach out to our Technical Support Center by pressing the 'Contact Us' button on the right of the screen.