gongjigongyi.com
与米乐m6网页版登录入口代表实时聊天。 工作时间：上午 9:00 - 下午 5:00（太平洋标准时间）。
电话
致电我们
工作时间：上午9:00-下午5:00（太平洋标准时间）
下载
下载手册、产品技术资料、软件等：
反馈
产品支持和下载
欢迎访问米乐m6网页版登录入口产品支持
虽然我们很愿意与您全天“讨论技术问题”，但我们知道您时间宝贵。因此，我们简化了流程，让您可以轻松下载所有当前产品以及许多停产产品的手册、产品技术资料和软件。只需告诉我们您使用的是哪种产品，我们就会向您显示所有相关信息。
您选择的产品型号当前有售。 提供了以下支持信息。
-
产品技术资料 文献编号： 发布日期 TPS2012B • TPS2014B • TPS2024B数字存储示波器数据表
3MC-17750-10
-
手册 手册类型 部件号： 发布日期 TPS2000B 系列 用户手册
数字存储示波器主要用户 077138601 TPS2000B 系列 用户手册
数字存储示波器主要用户 077138600 TPS2000 系列用户手册
数字存储示波器 User Manual用户 071144804 Digital Oscilloscope Series Programmer Manual
TBS1000B, TBS1000, TDS200, TDS1000/2000, TDS1000B/2000B, TDS1000C-EDU/TDS2000C, TDS2024C, TPS2000/TPS2000B Series程序员 077044403 TPS2000B Series
Oscilloscope Safety and Compliance用户 071354302 Read This First
TPS2000B Series Oscilloscopes available documentation and applications用户 061442600 TPS2000B Series
Digital Storage Oscilloscopes维修 077044702 TPS2000B Series
Oscilloscope Safety and Compliance用户 071354300 Digital Storage Oscilloscope Declassification and Security Instructions
TBS1000, TBS1000B/TBS1000B-EDU, TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series解密 077077102 TPS2000B Series
Digital Storage Oscilloscopes维修 077044701 TPS2000/B BNC
Replacement Kit Instructions现场安装说明 071289500 TPS2000B Series
Digital Storage Oscilloscopes Service Manual维修 077044700 TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
Digital Storage Oscilloscope Declassification and Security Instructions Instructions解密 077044500 050-3642-00 and Above Instructions
Backlight Inverter Board Replacement Kit for TPS2000 Series Oscilloscopes Instructions现场安装说明 075093400 TDS200, TDS1000/TDS2000, TDS1000B/TDS2000B, and TPS2000 Programmer
Digital Storage Oscilloscopes程序员 071107504 Memory Erasure and Memory Parts List Instructions
TDS200, TDS1000/2000 & TPS2000 Series Digital Storage Oscilloscopes Instructions解密 071185700 TPS2000 Series Important Information
TPS2000 Series Important Information Other用户 071170202 TPS2000 BNC Instructions
Replacement Kit Instructions现场安装说明 063382900 TPS2000 Series Read This First
Oscilloscope User Manual Changes Read This First用户 063378900 P2220 Probe Safety Warning Sheet
1X/10X MHz Passive Probe Other用户 063380400
-
技术文档 文档类型 发布日期 示波器选型指南
米乐m6网页版登录入口为许多不同应用和用途提供示波器。为帮助您根据自己的需求选择适当的示波器，下面列出了示波器选型最常用的指标，以及确定您的要求的实用技巧。产品选择器指南 Tektronix 示波器附件选择指南
示波器探头相互参考, 无源探头， 有源探头， 差分探头和差分前置放大器， 电流探头， 高压探头和高压差分探头， 连接器和适配器， 光电转换器， 衰减器, 端接器和电缆， 仪器手推车/机架安装套件， 探头尖附件产品选择器指南 浮地测量和隔离输入示波器基础知识
本应用指南将介绍电源测量术语，阐述为进行浮地测量提供的不同选项，重点介绍每种选项的优点和缺点。应用指南 示波器选型图
轻松选择示波器。操作方式指南 浮动测量 快速、准确、经济的 新方法
工程师和技术人员常常需要进行"浮动"测量，即测量的两个点都不处于接地电位。该测量也常称为差分测量。"信号公共线"与地之间的电压可能会升高到数百伏。IsolatedChannel 技术，成为世界上一批具有 4 个隔离通道并使用电池供电的示波器，使得工程师和技术人员可以快速、准确、经济地进行多通道隔离测量始终将您的安全放在一位。应用指南 确保捕获完整图像
数字存储示波器对输入信号的取样速率越快，所显示波形的分辨率和细节的详细程度就越高。奈奎斯特取样理论表明取样速率至少应为被测信号中的最高期望频率的两倍。 然而，该理论仅适用于正弦信号。 现今的复杂波形无疑需要高于 2X 取样速率的数倍，才能精确捕获不断变化的事件或单次事件。应用指南 通过NI LabVIEW SignalExpress™ TE以及Tek tronix Instrumentation在线研讨会提高工作台生产力
米乐m6网页版登录入口和National Instruments利用易于使用的软件携手向您提供了用于简化信号采集、测试设置和分析的一些提示和工具。相关演示包括：USB即插即用连接、一次点击实现数据日志记录、实时分析和项目备案。应用指南
-
软件 文档类型 部件号： 发布日期 TEKVISA Connectivity Software - V5.11.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …驱动程序 066093813 Tektronix Openchoice Desktop Application TDSPCS1 - V2.8
The Tektronix OpenChoice Desktop free application lets you capture oscilloscope screen images, waveform data, and settings from a Microsoft Windows computer. After installing the software, refer to the section “Connecting to a PC” in your …辅助功能 066093915 TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …驱动程序 066093812 TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …驱动程序 066093811 Tektronix Openchoice Desktop Application TDSPCS1 - v2.6
The Tektronix OpenChoice Desktop free application lets you capture oscilloscope screen images, waveform data, and settings from a Microsoft Windows computer. After installing the software, refer to the section “Connecting to a PC” in your …辅助功能 066093914 Tektronix Toolbars for Microsoft Office 32 bit - V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for the 32 bit versions of Microsoft Excel and Microsoft Word. This version of Toolbars requires OpenChoice TekVISA v4.0.4 (Part Number 066093809) to be preinstalled on the PC …辅助功能 066133202 TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …驱动程序 066093809 FIRMWARE UPDATE FOR TPS2000 and TPS2000B models
This firmware v11.09 is compatible with all TPS2000 and some TPS2000B models. See release notes for detailed Serial Number information on which TPS2000B models are supported by this firmware. All other TPS2000B models either contain the latest …固件 066139100 LabVIEW SignalExpress Step for TDS1000B, B-SC, C, C-EDU, TDS2000B, C
This Step provides the capability to connect, control and log data from the TDS1000B, B-SC, C and C-EDU; TDS2000B and C; and TPS2000B series instruments from the Signal Express Environment.应用 066130301
-
常见问题 常见问题 ID 我的示波器使用什么机架安装？
示波器系列 机架安装 TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B 无机架安装 - 皮带吊架 343-1689-00 TDS3000/TDS3000B/TDS3000C RM3000 DPO2000 RMD2000 …64571 What is the difference between digital real-time (DRT) sampling technology used in the TPS2000 Series and equivalent time sampling (ET) technology used by other manufacturers in the market?
Sample rate determines the highest frequency that can be captured in a single shot. For linear interpolation, the rule of thumb is that the sample rate must be 10 times higher than the highest frequency to be captured for a waveform to be reproduced …58751 What are the TDS2000B TV-sync triggering selections and which Standards are supported? Are these features optional or are they provided with the instrument?
The TDS2000B TV sync selections are Line Number, Odd field, Even field, All Fields and All Lines. The supported Standards are NTSC and PAL/SECAM. There is no TV trigger option available and no additional cost for these features. The TV trigger …64041 I have never used an isolated channel oscilloscope+ what advantage can I expect to gain from it?
The TPS2000 Series 4 IsolatedChannel™ input architecture provides true and complete channel-to-channel isolation for both the positive input and the negative reference leads, including the external trigger input. Refer to the IsolatedChannel …58386 I have a previous version of Open Choice Desktop software loaded on my PC. Do I need a new version to work with the TPS2000?
You can upgrade the software by using the version supplied with the TPS2000 oscilloscope.You can also download an upgraded version of the Open Choice Desktop from the Tektronix Web site. (This contains two distinct pieces of software: TekVISA and …58366 Is the isolation maintained when using the AC Adapter?
Yes. Full isolation is maintained.58501 I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the …63686 I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified. Prerequisites 1. PC equipped with Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …474266 I need a printer which will work with the TPS2000 series. Which one should I purchase?
An alternate method to using a printer with a Centronics port is purchase a printer which can read a compact flash card. Then you can save your pictures to TPS2000 compact flash card then print them direct from the printer, no cable required. The …57401 I can not get a screenshot of the full trace in XY mode. How do I save the full trace?
When saving a screenshot, sometimes only a portion of the XY trace will show:You can get the full waveform by turning on persistence in the Display menu:63676 I want to trigger on the primary frequency (perhaps 60 Hz)+ this frequency is modulated with the motor frequency (perhaps 600 Hz) with an amplitude of perhaps a third of the primary frequency's amplitude. The scope will not adequately trigger on the motor current signal.
This signal creates Multiple zero crossings which makes the triggering unstable. Turn down the amplitude of the composite signal (ch1) so that the scope's built in hysteresis will swamp out the motor drive zero crossings. This channel will be used …58436 I have a TDS3034B with the battery and charger. Can I use this battery and charger with the TPS2000 scopes?
No, the batteries and charger for the TDS3000 and TDS3000B series will not work with the TPS2000 series. The TPS2000 series batteries and the charger are unique and are designed specifically for this series.58371 I plan to measure Motor Drive signals with a TPS2024. Cat II & Cat III confuse me. What exactly is this?
CAT ratings are industry-standard category safety ratings, Test instruments are rated on their ability to withstand a voltage spike which are applied through a specified level of resistance. The installation categories are: CAT III Distribution …57411 On my TPS2000 series oscilloscope the BNCs are damaged or worn out. Can I replace them myself?
Yes, you can replace them. Order a BNC replacment kit Tektronix part number 050374800 for a TPS2000B series or order 050359800 if it is a TPS2000 non-B series. The kits includes instructions for replacement. You can also view the video below which …64861 On the TPS2000+ when do I use the multipurpose knob and when do I press the bezel buttons to change settings?
You use the multipurpose knob when the indicator light associated with the knob is lit (e.g., cursor position in the cursor menu). If the light is not lit, select on or off operations by pressing the bezel button (e.g., measurement type in the …58556 The TPS2000 series scope is powered by rechargeable batteries+ is a battery charger included with the scope?
The batteries are charged by the scope internally when it is connected to the AC outlet. There is an external charger available but it is not included with the scope. The part number is TPSCHG, ( External battery charger for TPS2000 Series …58581 Is there a special operating mode that enables me to get 8 hours of battery operation in the TPS2000 Series?
No, there is no low-power setting as on some products because TPS2000 monitors the remaining battery life. With two fully charged batteries, the product can operate for up to 8 hours even with the front panel backlights operating. In addition, the …58511 In reference to the TPS2000 + what do you mean by "hot-swappable" batteries?
While the product is running on one battery, you can install another fully charged battery without having to turn off the oscilloscope or interrupt normal operation. (The oscilloscope drains only one battery at a time and the lowest-capacity battery …58451 Is the Windows 7 driver for the RS232 to USB cable adapter (p/n:174-5813-00) available?
The driver for the adapter 174-5813-00 for Windows 7 support is available from its chip vendor at here.64476 What are the differences between the two frequency measurements that the TPS2000 Series makes?
Automatic Frequency Measurement Method used to make measurement: Reciprocal of the Period measurement. Made over the first complete cycle in the record. Period measured from the first mid-ref crossing to the third mid-ref crossing Accuracy (typical …58636 What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 …64251 On the TPS2000+ where is the trigger point when the pulse width trigger is used and a specified amount of time is selected?
Equal: Oscilloscope triggers when trailing edge of the pulse crosses the trigger level. Not equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues …58561 Are the TPS2000 oscilloscope BNC inputs (and external trigger) isolated from the I/O ports on the back of the instrument?
Yes. For example, you can use OpenChoice® PC connectivity software with the TPS2000 series while making floating measurements (within the specified instrument and probe limits), and the optional WaveStar software can be used for fully programmable …58046 Are Tektronix current probes compatible with the TPS2000 series oscilloscopes?
Yes, here is the list for the recommended current probes. A621 5 - 50 kHz AC current probe, 2000A A622 DC - 100kHz AC/DC current probe, 100A P6021 120Hz - 60 MHz AC current probe, 15A P6022 935 Hz - 120MHz AC current probe, 6A TCP202 (requires 1103 …58041 How high can I float the TPS2000 series oscilloscopes?
The input to the scope can accept up to 600 VRMS CAT II or 300 VRMS CAT III BNC shell to earth ground, 1200 VRMS CAT II between any two channel commons with each of the channel commons not being more than +/- 600 VRMS from earth ground. The P2220 …58321 How do I declassify or sanitize my instrument?
Declassification and Security documents for many Tektronix products are located in the Download, Manuals and Documentation on Tek.com. /node/7106. Enter your instrument model number and select Download Type as "Manuals". At the results screen, on …55686 How do I know how much battery charge is left in the TPS2000 batteries?
There is a Battery Status menu found under the Utility menu System status. Notes indicate whether battery 1 and battery 2 are installed and the time remaining on each battery.58281 How do I turn the TPS2000 front-panel backlight on or off?
Press the Utility menu button and then the Options bezel button. The top bezel button toggles the backlight on and off.58296 How do I upgrade the TPS2000 series oscilloscope firmware?
UPGRADE PROCEDURE You will need a CompactFlash reader and a CompactFlash card connected to your computer. Download this version of firmware to your PC by pressing the "Download" button on the Firmware Update for the TPS2000 Series page and following …57346 What is the charging time for the TPS2000 series batteries?
Batteries can be charged either in the instrument or in the optional TPSCHG external charger. In the external charger, a battery will charge in 3 hours. When AC power is supplied to the TPS2000, a battery will charge in about 4.5 hours if the …58736 When the TPS2000 series scope is plugged into an AC power source+ there is no indication that the unit is running on AC power. Is this also true when the unit is running on its battery?
When the unit is plugged into AC power, there is no indicator light. However, there is an indicator light on the unit when the battery is being charged in the instrument (i.e., the instrument is connected to AC power and the battery[ies] is [are] not …58946 Why does OpenChoice Desktop "Get Screen" operation time-out and display "Data transfer ended unexpectedly", when “Select Instrument”, “Get Data”, “Get & Send Settings” operations are successful?
When connecting to a TPS2000/B, TDS1000, TDS2000, or TDS3000/B series scopes with a Centronics parallel printer port using direct RS232, or RS232 to USB adapter, you must set the scope’s Printer Port to “RS232” (TDS1000/2000, TPS2000/B; Utility …64806 Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …60306 What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix. K4000 K420 K475 More information can …64561 Why does Math work differently between my older TDS200 or TDS1000/2000 series oscilloscope+ and my newer TDS1000B/2000B series oscilloscope?
The way to calculate math was different in the older TDS200 and TDS1000/2000 series oscilloscopes then most other oscilloscopes, including the new TDS1000B/2000B series.The older instruments used a method that could be called Display Math. In Display …64386 What operating system does the TDS1000B+ TDS2000B+ TPS2000+ MSO/DPO2000+ TDS3000C+ MSO/DPO3000 and MSO/DPO4000 use? And are they susceptible to viruses?
The above oscilloscopes use closed embedded real-time operating systems and do not have the capability to create, modify, run or save programs that are on a USB device or LAN . Therefore, they are not susceptible to virus attacks and cannot spread …56996 I am using the TPS2024 with the current probe A622. The scope is measuring the charging current of a capacitor+ the reading of the RMS and Frequency is not shown and all that is displaying are question marks. What is the set up so the scope can make these measurements?
The best solution is to use the TPS2PWR1 Power Measurement Application software module. Using the Power Application module we find the Cycle RMS value, 383 mV, and Frequency is 60.02 Hz If you do not have the Power Application module a work …58346 Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …64791 Does the TPS2000 Series use an industry-standard battery (available locally)?
No. To ensure proper instrument performance, you should purchase the batteries only from Tektronix.58211 Do I have to put the battery in slot 1 if I'm using only one battery?
No, the two slots are identical.58146 Does turning off the TPS2000 front-panel backlights make the batteries last longer?
Yes, but only about 10 minutes longer.58216 Does the P2220 probe replace the P2200 probe?
Yes. The P2220 probe is compatible with TDS1000 and TDS2000 Series as well as the TPS2000 Series. The P2200 probe and other standard single-ended passive probes cannot be used with the TPS2000 Series because safe operation of the TPS2000 Series …58196 My TPS2024 with the Power Application module installed the Harmonics selection does not properly measure the harmonics on my waveform.
The following shows an example of a waveform with harmonics. If the secondary frequency is not an exact multiple of the fundamental the scope may display mixed results. The recommendation is to change the Setup selection in the Harmonics menu from …58541 Do you offer a RS232 to a USB cable adapter?
Yes. This can be ordered as part number 174-5813-00.59281 My TPS2000 scope was running FV:V10.14 and I updated to FV:V10.20. I notice the cooling fan is running much faster now. Is this situation correct?
Yes, the fan has 3 speeds: fast, slow, and off. With the new firmware there were changes made to the fan algorithm. Also when the instrument is powered up the fan start up is at high speed. Speed changes can be adjusted once a minute. The scope …57566 Can I operate the TPS2000 series oscilloscope on AC power without a battery installed?
Yes. The AC adapter supplies 15V DC to power the instruments so that no battery is required.58091 Can I convert my wfm files to an open format+ such as a CSV (comma separated values) file?
You can use one of the following three WFM to ASCII converters. Converter for TDSxxx - works with files created by TDSx00 series (for example, TDS500 series) Converter for TDS5xxx,TDS6xxx, TDS7xxx, DPO7xxx,DPO70xxx, DSA70xxx Converter for the …56386 Can I look at and measure an instantaneous power waveform?
With the TPS2000's math multiply function, you can easily multiply a voltage and current waveform to obtain an instantaneous power waveform. You can independently scale this math waveform for optimized viewing. In addition, you can make power …58081 Can Tektronix Digital Storage Oscilloscopes export XY Display mode waveform data in a single file?
Tektronix Digital Storage Oscilloscopes XY Display mode waveform data is displayed by taking the voltage amplitude portion of the real-time YT voltage vs. time waveforms simultaneously acquired on channel 1 and channel 2 (or channel 3 an 4 on some …59141 Can I download waveform data and screenshots to my computer by using HyperTerminal?
Yes you can. Use the first procedure to get waveform data, and the second to get a screenshot. For both Waveform data and screenshots, setup Hyperterm for communication. If you want to see the characters you type in the window (recommended), then you …58076 Can the trigger signal frequency readout provide frequency measurements greater than the rated bandwidth of the oscilloscope?
Yes; however, this depends on the available signal strength.58131 Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support …63266
