米乐m6网页版登录入口,mile米乐m6

产品支持和下载

欢迎访问米乐m6网页版登录入口产品支持

虽然我们很愿意与您全天“讨论技术问题”，但我们知道您时间宝贵。因此，我们简化了流程，让您可以轻松下载所有当前产品以及许多停产产品的手册、产品技术资料和软件。只需告诉我们您使用的是哪种产品，我们就会向您显示所有相关信息。

您选择的产品型号当前有售。提供了以下支持信息。

产品技术资料	文献编号：	发布日期
AC/DC 电流测量系统 TCP300 和 TCP400 系列 AC/DC 电流测量系列是满足当今电流测量需要的非常先进的电流测量系统。当通过 TEKPROBE Level II、TekConnect（使用 TCA-BNC）或 TekVPI（使用 TPA-BNC）接口连接米乐m6网页版登录入口示波器时，电流测量和计算变得轻松简单。	60C-16458-12	25 Jul 2019

手册	手册类型	部件号：	发布日期
Tektronix Supplemental Product Information Sheet for the People's Republic of China Other	用户	071218105	09 Jun 2015
TCPA300/400 & TCP300A/400 Series Amplifiers & AC/DC Current Probes	主要用户	077118302	22 Jan 2020
TCPA300/400 & TCP300/400 Series Revision A: Amplifiers & AC/DC Current Probes	主要用户	077118300	16 Apr 2009
TCPA300/400 & TCP300A/400 Series Amplifiers & AC/DC Current Probes	主要用户	077118301	16 Apr 2019
TCPA300/400 and TCP300/400 Series Amplifiers & AC/DC Current Probes Service Manual	维修	077032300	18 Sep 2009
TCPA300/400 & TCP300/400 Series Amplifiers & AC/DC Current Probes Instruction Manual	主要用户	071118303	30 Apr 2007
TCPA300/400 and TCP303/305A/312A/404XL Amplifiers and Current Probes Compliance and Safety	用户	071364301	27 Aug 2019
TCPA300/400, TCP300/400 Instruction Manual AC/DC Current Measurement Systems	维修	071118400	20 Feb 2003
Tektronix Supplemental, 071329504 Product Information Sheet for the People‚s Republic of China	用户	071329504	11 Apr 2018
067-1478-00 Power Measurements Deskew Fixture Power Measurements Deskew Fixture Instructions	主要用户	071117501	10 Sep 2004
TCPA300/400 & TCP300A/400 Series Amplifiers & AC/DC Current Probes (Revision B) Service Manual	维修	077032301	12 Apr 2013
Probes and Accessories Declassification and Security Instructions Declassification and Security	解密	071238400	14 Oct 2020

三相电机驱动测量演示

观看三相电源系统演示，了解 5 或 6 系列 B MSO 示波器精确测量开关电源转换器和控制电路性能的能力。使用差分探头和三相逆变器/电机驱动分析软件，可以在宽电压和电流范围内进行高带宽测量。

时长: 3:24

如何应对LPDDR5X的测试挑战

探索测试LPDDR5X，这是JEDEC最新的低功耗内存规范。深入了解最新一代低功耗内存的新变化和保持不变之处，并了解Tektronix是如何应对LPDDR5X测试挑战的。

时长:

PCIe 6.0圆桌讨论：面向64 GT/s及更高速率的未来设计

随着技术的进步和数据传输需求的增加，了解PCI Express 6.0电气设计和验证的最新最佳实践至关重要。来自Tektronix、Synopsys和Anritsu的专家将讨论设计高速互连的未来的关键考虑因素，从了解最新的技术演进到利用先进的仿真和测试方法。

时长:

如何应对全新DisplayPort v2.1的测试挑战

DisplayPort v2.1（DP2.1）规范和合规性测试要求的发布引入了独特的挑战，需要一种新的测试方法来减少不断增长的测试时间。本次演讲钟，我们将简要介绍DP2.1得测试挑战及全新测试解决方案。

时长:

车载多比特以太网符合性测试

自动驾驶和互联车辆正在推动更高速度的车载网络。我们提供的视频演讲和课件对最新的汽车多比特以太网（10Gbps）符合性测试的新测量要求进行了深入探讨，探讨了MultiGBASE-T1（IEEE 802.3ch）的测试案例，以及工程师在测试设置和执行期间可能遇到的陷阱。除了符合性测试，还将介绍系统级噪声测试，使用非侵入式的信号分离方法，对100BASE-T1进行协议解码和信号完整性分析。 …

时长: 55m 37s

USB4 v2.0和PAM3信号传输的物理层测试挑战及应对

USB4V2标准提供了诸多优势，包括更高的数据传输速度、更好的电力传输和增强的安全措施。在本次会议中，您将了解为何USB4V2采用了PAM-3信号传输。我们将介绍测试PAM-3信号时面临的挑战，以及为物理层测试引入的测量方法和测试变化（包括发送端和接收端）。

时长:

The Science Behind The Low Noise

What's the big deal with low noise? We talked to our engineers about how they achieved ground-breaking noise performance in the 6 Series Mixed Signal Oscilloscope.

时长:

How to Perform Embedded PCIe Measurements

In this video we look at a topic that is becoming increasingly important in the high-speed serial industry—how to perform embedded measurements at the IC or PCB level using probes.

时长:

How to Control a Tektronix Oscilloscope Over a LAN

Learn how to use the eScope function to remotely control a Tektronix oscilloscope over a network without any special software. This video shows how to find the IP address of the scope and use a …

时长: 2:14

A New Way of Performing Multi-Channel Spectrum Analysis on an Oscilloscope

If you're doing mixed frequency/time domain work, Spectrum View makes it easy. Learn how to set up 5 and 6 Series MSOs to display synchronized time and frequency domain views on multiple channels …

时长:

2系列MSO - 五个你需要它的原因

时长:

2系列MSO - i2C 串行解码

时长:

2系列MSO - FFT

时长:

USB3 Compliance Testing Comprehensive Efficient

Learn how to dramatically cut down test time on required compliance interop tests for USB3 using an automated test suite from Tektronix.

时长:

USB 31 Debugging When Compliance Measurements Fail for TX

This short video shows how to debug a compliance measurement that has failed by using Tektronix’ Jitter and Eye Diagram Software, DPOJET. Using DPOJET, engineers can go from a compliance …

时长:

PAM4 Electrical

The accelerated development of 400G Ethernet technology is driving new requirements through the test community as it relates to measuring electrical PAM4 systems. This presentation will review …

时长:

MSO-DPO70000 Product Demo-Overview

The MSO/DPO70000 Series oscilloscope delivers exceptional signal acquisition performance and analysis capability. Discover your real signals and capture more signal details with the industry's …

时长:

Impact of variable Bandwidth on Optical Measurements

Finding the right filter settings for your optical TDECQ and NRZ measurements can be a pain on conventional solutions. With the new real-time O to E’s (DPO7OE Series) from Tektronix changing the …

时长:

ECOC 2016 PAM4 Software Updates

Find out how new PAM4 software updates including full noise decomposition enable you to ensure your designs comply with the latest changes in compliance standards.

时长:

DPO7OE Series Optical Probe Overview

See the versatility of our high-speed optical-to-electrical converters (DPO7OE1 and DPO7OE2 Optical Probes) for 200G and 400G PAM4 measurements. Multiple high-speed acquisitions of long pattern …

时长:

Clock Recovery for PAM4

In this video you will learn how easy it is to recover a clock on an optical PAM4 signal and display an eye. The DPO7OE1 and DPO7OE2 is the perfect solution for optical high-speed measurement …

时长:

400G Coherent Optical Demo

Take a look at Tektronix complete 400G coherent optical test system recently on display at OFC. It includes next generation signal generation, modulation, acquisition, and analysis.

时长:

Room to Grow

Tackle today's high-speed serial signals and tomorrow's too with the scalable, flexible DPO70000SX series. Watch this short video to see how.

时长:

NEW Leading Edge P7700 Series Probe

The NEW P7700 Series TriMode Probe provides the highest probe fidelity available for real-time oscilloscopes. Watch our 60-second video to see how this new probe can help minimize noise and easily …

时长:

不一样的米乐m6网页版登录入口

时长:

2 Series MSO Mixed Signal Oscilloscope Technical Product Overview

This video gives an overview of the 2 Series MSO Mixed Signal Oscilloscope. It includes a brief introduction of key features and specifications, then discusses details about the modern user …

时长: 16m 8s

2 Series MSO Mixed Signal Oscilloscope Introduction

This video provides a short introduction of the key features and specifications of the 2 Series MSO Mixed Signal Oscilloscope.

时长: 3m 53s

2 Series MSO Mixed Signal Oscilloscope - Remote Collaboration

This video provides an overview of how your global engineering teams can easily collaborate remotely with the 2 Series MSO Mixed Signal Oscilloscope.

时长: 3m 16s

2 Series MSO Mixed Signal Oscilloscope – Integrated Arbitrary Function Generator

This video provides an overview of the integrated arbitrary function generator available with the 2 Series MSO Mixed Signal Oscilloscope.

时长: 1m 44s

2 Series MSO Mixed Signal Oscilloscope – Modern User Interface and Simplified Controls

This video provides an overview of the touchscreen user interface and simplified controls featured with the 2 Series MSO Mixed Signal Oscilloscope.

时长: 2m 26s

2 Series MSO Mixed Signal Oscilloscope – Advanced Triggering and Search and Protocol Decode

This video provides an overview of the advanced trigging, search and protocol decode capabilities of the 2 Series MSO Mixed Signal Oscilloscope.

时长: 2m 30s

2 Series MSO Mixed Signal Oscilloscope – A Full Set of Analysis Tools

This video provides an overview of the analysis tools offered by 2 Series MSO Mixed Signal Oscilloscope.

时长: 2m 22s

2 Series MSO Mixed Signal Oscilloscope - Accessories

This video provides an overview of the standard and optional accessories for the 2 Series MSO, including battery pack, VESA mount, rack mount kit, and protective case, as well as the variety of …

时长: 1m 19s

From Probe to Pixel

End to end measurement solutions from Tektronix enable researchers and designers to comprehensively and swiftly analyze, debug and test cutting-edge technology with greater speed and precision …

时长:

2016 OFC Exhibit Overview

Get an overview of the optical solutions available from Tektronix. Learn about what we showcased at our OFC 2016 exhibit, then learn more about these solutions online.

时长:

Whats new in SAS14 and SATA Test Solutions Webinar

Description: Learn what's new in SAS1-4 and SATA testing. You'll gain an understanding of the latest SAS and SATA versions, and their implications for both transmitter and receiver testing.

时长:

Thunderbolt Compliance Test Setup Webinar

View our webinar, Choosing the Best Test Setup for Thunderbolt™️ Compliance Testing, and learn which test setup is best suited for your Thunderbolt 3 and Thunderbolt 4 design. 课件：Choosing the Best …

时长: 49:59

Memory Interface Verification and Debug

This webinar will explain how to prepare for next generation DDR-based memory testing. Learn about the changes these new standards bring to electrical verification and how to prepare for proper …

时长:

Efficiently Design and Electrically Validate a DDR4 Interface

This webinar will show how Cadence and Tektronix can enable you with flexible and power efficient DDR4 IP, design and analysis tools used in the office, and lab-based solutions to address the key …

时长:

Triggering on an ASK (Amplitude Shift-Keying) Signal with Spectrum View

Watch this short demo of RF vs Time hardware trigger to see how an ASK (Amplitude Shift-Keying) signal changes over time. The Spectrum View capability on the 4, 5 and 6 Series MSO oscilloscopes …

时长: 3:16

Spread Spectrum Clock Analysis With RF vs Time Triggering

See how to stabilize a hardware trigger on the up-down chirp pattern of a spread spectrum clock using a Frequency Deviation vs. Time trigger. The Spectrum View capability on the 4, 5 and 6 Series …

时长: 2:14

监测电源的步进负载响应

在检查电源控制环路的增益和相位裕量后，我们可以监测电源对阶跃负载变化的响应，观察控制环路的效果。在本例中，示波器内置函数发生器的脉冲输入到Picotest有源电流注入器中，对电源需求应用阶跃变化。信号源：任意波形/函数发生器 (内置到6系列MSO中) Picotest PJ2111A电流注入器配置： 6系列MSO示波器

时长: 01:38

测量DC-DC转换器的负阻

用实例说明怎样确定EMI滤波稳定性和米德尔布鲁克准则。米德尔布鲁克准则是确定开关式电源的输入滤波器是否导致不稳定性，或使电压编程DC-DC转换器开关式电源性能参数劣化的一种标准。信号源：任意波形/函数发生器 (内置到6系列MSO中) 台式电源 Picotest J2121A High Power线路注入器配置： …

时长: 03:13

测量电源的波特图/控制环路响应

本视频介绍了怎样使用配有控制环路响应测量功能的示波器，测量电源控制环路的频响(波特图)。波特图是系统的频响图，表征不同频率中的增益和相位。调制信号被注入到反馈环路中，然后可以确定调制信号和控制环路输出比例，计算增益，再按时间进行对比，找出相位。信号源：任意波形/函数发生器 (内置到6系列MSO中) Picotest J2101A注入变压器配置： …

时长: 01:39

测量电源抑制比(PSSR)

用实例说明怎样使用示波器测量电源抑制比，在本例中是线性稳压器。电源抑制比或电源纹波抑制(PSRR)是衡量电路的电源抑制性能的指标，用输出噪声与输入噪声的对数比表示。信号源：任意波形/函数发生器 (内置到6系列MSO中) 台式电源 Picotest J2120A线路注入器配置： 6系列MSO示波器负载： DUT的输出上的DC负载

时长: 01:34

使用示波器上的TDR技术测量阻抗

用实例说明怎样使用时域反射计(TDR)测量电缆和PCB轨迹的阻抗和长度，以及印刷电路板的介电常数和故障位置。您将看到多个实例，来说明阻抗差异和不匹配所产生的效应。此外，您将看到怎样使用TDR使用的同样的快速边沿，来迅速检查电缆和连接的平坦度。配置： 10 GHz 6系列MSO示波器，测量响应 Picotest Fast Edge信号发生器(32 ps典型值)及标配10 …

时长: 05:42

使用DC偏置测量电感器

这个视频用实例说明了在对电感器应用1 A DC偏置电流时，怎样使用线路注入器和示波器测量频率相关电感。电源在输入滤波器和输出滤波器中都有电感器。这些元件的有效电感在高工作电流时会明显下降，导致纹波和EMI提高。使用DC偏置进行测试，可以帮助您了解电感器的在线性能。信号源：任意波形/函数发生器 (内置到6系列MSO中) 台式电源 Picotest …

时长: 01:49

Low amplitude RF emission analysis with RF vs Time Triggering

See how the RF vs Time hardware triggering capability (Spectrum View) on the 4, 5, and 6 Series MSO oscilloscopes can capture a low amplitude RF emission. This video focuses on the low amplitude …

时长: 4:23

Finding root cause of EMI signals with Spectrum View

See how to track down the source of transient RF/EMI emissions with Spectrum View and the RF vs Time triggering capabilities. Clearly determine which PCB signals are causing EMI emissions so that …

时长: 4:21

Comparing phase on RADAR pulses with the 6 Series MSO

An AWG70002B was used to create a pair of 20us wide RF pulse trains at 3.85GHz. One pulse train has a constant/unchanging phase – this is our reference and is applied to Ch1. The other pulse …

时长: 3m 29s

Capturing a Clock Frequency Glitch With RF vs Time Trigger

See how an edge trigger on the RF Frequency Deviation vs Time trace isolates and captures a short duration transient in the frequency of a clock signal. The Spectrum View capability on the 4, 5 …

时长: 1:55

700uΩ有源2端口阻抗测量

用实例说明怎样使用示波器和信号源，测量有源电源平面的毫欧级阻抗。信号源：任意波形/函数发生器 (内置到6系列MSO中) Picotest J2161A分路器配置： Picotest J2102B共模同轴电缆变压器，用于隔离 6系列MSO示波器

时长: 01:39

2端口并联传送阻抗测量

用实例说明怎样测量VRM(稳压器)模块上的2端口并联阻抗。电源平面阻抗是评估功率完整性最常用的指标，2端口并联传送方法则是评估中采用的黄金标准。为了在需要大的瞬态电流期间使电源轨道电压保持在极限范围内，毫欧级电源平面阻抗必不可少。信号源：任意波形/函数发生器 (内置到6系列MSO中) Picotest J2161A分路器配置： 6系列MSO示波器 …

时长: 01:48

CAN XL Decoding and Triggering with an Oscilloscope

CAN XL is a third generation of CAN bus, designed to bridge gaps between existing CAN standards and higher data-rate standards such as Automotive Ethernet. This short video shows how to set up …

时长: 3m 45s

Multi-Channel Wireless Modulation Analysis

See how oscilloscopes such as the 6 Series B MSO Mixed Signal oscilloscope are enabled by advanced features of Tektronix SignalVu-PC software to provide RF spectral and modulation analysis across …

时长: 5:08

USB 32 testing and debugging

时长:

Ripple noise measurement of Power supply

时长:

PCIe-compliance-testing-and-analysis

时长:

Automotive millimeter-wave radar signal analysis

时长:

Measuring Frequency Settling Time

Frequency settling time, an essential measurement in the design and evalsuation of programmable oscillators, phase locked loop circuits, RF synthesizers and more, becomes much easier when the …

时长: 14:12

1000BASE-T Gigabit Ethernet Testing with Disturber

Watch a demonstration of 1000BASE-T (Gigabit Ethernet) transmitter (Tx) testing with a disturber. Gayland Pounder, Tektronix Application Engineer, uses TekExpress Automotive Ethernet software. …

时长: 6:38

TBS1000C Two-Channel Digital Storage Oscilloscope - Making Measurements

This short video offers three simple techniques for making oscilloscope measurements to help you get your testing done quickly.

时长: 1m 17s

Exploring the Integrated Arbitrary Function Generator - 2, 4, 5, 6 Series MSOs

Having an arbitrary/function generator built into your oscilloscope is useful and convenient. Learn about the AFG outputs available in 2, 4, 5 and 6 Series MSOs.

时长: 4m 56s

Logic and Mixed Signal Analysis

Built-in logic analysis on mixed signal oscilloscopes expand visibility into digital systems. This video gives a quick overview of the logic probe, settings, triggering and searches.

时长: 3m 4s

Advanced Power Supply Measurements and Analysis with Tektronix Oscilloscopes

Learn how the Advanced Power Supply Measurements and Analysis package for Tektronix oscilloscopes simplifies analysis of power conversion systems with automated power quality, harmonics, switching …

时长: 7m 46s

CAN Bus Decoding and Triggering

This video covers the basics of CAN bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.

时长: 5m 16s

Oscilloscope Measurements on 3 Phase PWM Systems

Making measurements on the PWM outputs of inverters and motor drives is challenging. Learn about automated 3-phase power measurement packages on 4, 5 and 6 Series B MSO oscilloscopes that deliver …

时长: 7m 26s

SPI Bus Decoding and Triggering

This video covers the basics of SPI bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.

时长: 5m 18s

I2C Bus Decoding and Triggering

This video covers the basics of I2C bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.

时长: 5m 12s

MIMO and Phased Array RADAR System Testing Using SignalVu Software

See how SignalVu VSA software offers insight into MIMO and Phased Array RADAR systems at frequencies and bandwidths up to 70 GHz on up to 4 channels. SignalVu VSA software enables a multi-channel …

时长: 9:41

SignalVu MIMO RADAR System Testing

See how SignalVu VSA software version 5.3 paired with a Tektronix DPO70000SX or MSO/DPO70000DX Series oscilloscope makes an excellent choice for validating a MIMO phased array RADAR because of the …

时长: 5:28

What is Fast Fourier Transform

For new engineering students, gaining a quick understanding of fundamental concepts is an important step in the learning process. This updated video explains the fundamental principles of the Fast …

时长: 4m 3s

TBS1000C Two-Channel Digital Storage Oscilloscope – Optimizing Measurements

Whether oscilloscopes are new to you or you’re a more experienced user, you can optimize your measurements results with the tips offered in this short video.

时长: 2m 6s

1000BASE-T Gigabit Ethernet Return Loss Demo

Watch a demonstration of 1000BASE-T (Gigabit Ethernet) return loss testing. Gayland Pounder, Tektronix Application Engineer, uses TekExpress Automotive Ethernet software. Hardware includes a …

时长: 4:40

1000BASE-T Gigabit Ethernet Testing Demo

Watch a demonstration of 1000BASE-T (Gigabit Ethernet) testing. Gayland Pounder, Tektronix Application Engineer, uses TekExpress software to perform the testing. Hardware includes a Tektronix …

时长: 6:32

TBS1000C Two-Channel Digital Storage Oscilloscope - HelpEverywhere

Watch this short video to see how the Help Everywhere feature built into the TBS1000C Two-Channel Digital Storage Oscilloscope accelerates the learning curve for new users and provides a great …

时长: 53s

Overview of RF Analysis on Tektronix 4, 5 and 6 Series Mixed Signal Oscilloscopes

Learn about the many types of RF analysis available on the 4, 5 and 6 Series MSOs, enabled by the patented integrated digital downconverters behind each channel. This overview touches on …

时长: 1:51

Test Automation and Python Programming

Customers across all industries and applications are using automation to extend the capabilities of their oscilloscopes. Here we cover what you need to get started programming scopes in Python. …

时长: 31:09

Test Automation through Scripting with Python

Watch this video to see how Python scripting can be used together with an 2 Series MSO oscilloscope and 2400 Graphical Series SMU instrument to automate testing, increasing quality, driving …

时长: 0:38

TekScope V2-4 - Whats New

Watch this short video to learn about the new features in TekScope version 2.4, including TekScope Basic – a new free tier license, maintenance licenses, fast frames with improved support, a new …

时长: 4m 39s

Gain Insights with the Spectrogram Feature of Spectrum View

See how you can get more insight to transient and dynamic behavior of the spectral content of your signals. Using the new spectrogram feature, an enhancement of the RF vs time option for Spectrum …

时长: 7:15

Decoding Near Field Communications (NFC) on 4, 5 and 6 Series MSOs

How to use Tektronix 4, 5 and 6 Series MSO oscilloscopes to decode and analyze Near Field Communications (NFC) wirelessly, using a near field probe and the RFNFC package on the instrument.

时长: 6:02

Electric Vehicle Charging - What's Ahead?

With electric vehicles (EVs) increasingly becoming mainstream, the industry must create a convenient and reliable EV charging network to ensure driving adoption. Watch as we discuss what's coming …

时长: 26:18

What Is Driving the Power Electronics Market?

Gain new insights into the field of power electronics including market overviews and an overview of new device technologies from Dr. Ana Villamor, Team Lead Analyst for power electronics, Yole …

时长: 28:44

PCIe Gen6 Receiver Link Training

Witness the world's first PCIe Gen6 receiver link training test, exhibited by Anritsu at the June 2023 PCI-SIG Developer’s Conference and featuring the Anritsu MP1900A BERT, Tektronix DPO70000SX …

时长: 01:59

PCI Express 6.0 Receiver Test Demonstration on Synopsys PHY

See our demonstration of new PCIe® 6.0 Rx measurement methodologies on the state-of-art Synopsys® PHY and a discussion of techniques for solving new multilevel validation challenges. The January …

时长: 2:25

PCIe Beyond Gen6

View what’s beyond PCIe Gen6 with this 128 GT/s system, a joint showcase created by Tektronix and Synopsys at the June 2023 PCI-SIG Developer’s Conference. Synopsys’ Madhumita Sanyal, Sr. Staff …

时长: 01:16

SignalVu Spectrum Analysis Software

Hear an overview of SignalVu, Tektronix's RF and vector signal analysis platform. Tektronix' spectrum analyzers and oscilloscopes combined with SignalVu uniquely allows you to view live spectral …

时长: 00:12:51

6G Network Research

See how a team at Wuppertal University in Germany is developing innovative new technologies that will underpin 6G networks. The team is relying on fast, synchronously running instruments as well …

时长: 5:44

Ground Loops: What Are They, Why Should We Care, and How Can They Be Fixed?

Power rail noise is one of the most significant sources of jitter in high-speed systems, phase noise in RF systems, and noise in A/D and D/A converters. Semiconductor manufacturers are responding …

时长: 27:30

Double Pulse Testing: Smart Probing OR Cable Monster?

Watch as we discuss techniques for properly testing Silicon Carbide (SiC) devices. We'll review considerations for creating a double pulse test setup. We offer an overview of basic equipment …

时长: 30:05

How Silicon Carbide Is Powering the Electric Vehicle Revolution

Silicon carbide (SiC) MOSFETs are supplanting silicon IGBTs in the drivetrain inverter of battery electric vehicles. While today SiC claims only around 5% of the market, with the vast majority of …

时长: 30:07

2 Series MSO - Frequency Response Analysis

What if you need to see the gain and phase of your circuit over a set of frequencies? Watch this short video to see how easy it is to carry out frequency response analysis and create your own …

时长: 2m 10s

Automotive Ethernet 100BASE-T1 Signal Separation and Protocol Decoding Demo

A demonstration of 100BASE-T1 Automotive Ethernet protocol decoding on a 6 Series MSO oscilloscope. This video shows how full-duplex 100BASE-T1 can be separated and decoded without breaking the …

时长: 5:21

Signal and Power Integrity

Watch as panelists discuss emerging technologies and the feedback loop between signal integrity and power integrity. See how to combine jitter and power integrity analysis into a formidable tool …

时长: 35:32

How to Measure Power Rail Current with a Shunt Resistor

Make extremely accurate power rail measurements using two Tektronix power rail probes, a Keithley DMM6500 touchscreen Digital Multimeter, and ultra-low-noise 6 Series mixed signal oscilloscope …

时长: 0h 1m 46s

How to Setup VNC for 2 Series MSO Remote Operation

Watch this short video to see how easy it is to use the 2 Series MSO Mixed Signal Oscilloscope for remote operation via its VNC server.

时长: 3m 49s

SignalVu-PC Multi-Channel RF and Pulse Analysis

See how RF design and validation engineers working on MIMO, phased-array and beam-forming systems can make fast, accurate pulse and phase measurements on as many as 8 channels using SignalVu-PC …

时长: 4m 37s

MIL-STD-1553 bus support

Learn how 5 and 6 Series MSO Mixed-Signal Oscilloscopes and the optional embedded serial bus analysis software provide unparalleled system visibility by decoding MIL-STD 1553 messages, triggering …

时长: 0h 3m 14s

Conquering Wideband Radar

Are you trying to build high fidelity wideband signal environments? Are you struggling to pick up on notoriously difficult to detect wideband signals? This webinar will focus on the challenges …

时长: 1h 2m 35s

Simplify Multi-Channel RF Generation and Analysis

Watch our Mixed-Signal Oscilloscope capturing multiple RF channels and performing RF analysis of radar pulses. Here we're taking advantage of the high-bandwidth and independent digital …

时长: 57s

Courseware Eco-System for Educators

This video provides a detailed demonstration on using the Tektronix Courseware Resource Center to access lab experiments and related educational material.

时长: 6m 4s

12 Things to Consider When Selecting your Next Oscilloscope

Technical Marketing Manager Wilson Lee discusses important criteria to use when choosing your next oscilloscope. In this webinar, you will learn about:• The “5 times rule” to avoid Bandwidth …

时长: 43m 11s

Facilitate student learning with built-in courseware on the TBS1000C and TBS2000B oscilloscopes

With the built-in courseware feature, the TBS1000C and TBS2000B oscilloscopes become a powerful educational tool enabling students to create labs on their computer and view them right on the …

时长: 1m 54s

vintageTEK Museum Tour

Enjoy a guided virtual walk-through of the Tek museum and hear from the museum director about how Tek alumni, fans and volunteers are passing along a lifelong love of engineering and technology …

时长: 13:23

Trends in High Speed Serial Test and Measurement

Join Pavel Zivny and David Bouse, Tektronix' Principal Technology Leads for Ethernet and PCI Express respectively, as they discuss developments in 112 Gigabit Ethernet, PCI Express Gen6, PAM4 …

时长: 6:56

Troubleshooting in the Fast Lane

Watch our review of the physical layer specification as well as compliance test and troubleshooting of the new IEEE 802.3ck Ethernet standard, with particular focus on the AUI interfaces test. The …

时长: 41:09

PCI Express Gen 5 Reference Clock Webinar

This webinar presents an overview of reference clock jitter requirements as they have evolved and offers techniques for making these low femtosecond measurements using a real time oscilloscope.

时长: 53:02

PCI Express 6.0 Transmitter Test Demonstration on Synopsys PHY

See our demonstration of new PCIe® 6.0 Tx measurement methodologies on the state-of-art Synopsys® PHY and a discussion of techniques for solving new multilevel validation challenges. The January …

时长: 2:12

PCI Express Gen 5 Update Webinar

Cloud-based computing power, storage capacity, and network bandwidth have led to the development of the PCI Express 5.0 specification for 32.0 GT/s. This webinar starts with an overview of 5.0 …

时长: 44:47

PCIe Gen5 Rx Calibration

Listen as Joey Chiu, Tektronix PCI Express Applications Engineer, discusses PCI Express Gen5 Receiver (Rx) calibration. He covers how to prepare for it, what to expect, troubleshooting, and how to …

时长: 23:15

PCIe Gen5 to Gen6 and Comparison to Electrical Ethernet

Watch as David Bouse explains the evolution of PCI Express from Gen5 to Gen6. Then hear from Pavel Zivny as he and David discuss PAM4 signaling in PCIe and how it compares with PAM4 as applied in …

时长: 1:00:00

DDR5 Test Challenges Webinar

Learn how you can address five of the thorniest measurement challenges associated with the new DDR5 standard. Get an update on the DDR5 Rx/Tx compliance test and insight in the latest …

时长: 56:20

LPDDR5 Automation Software Demo Video

Watch as the TekExpress DDR Tx Automation Software Solution for LPDDR5 is set up to match the hardware configuration for burst detection of a Device Under Test (DUT) and reporting of results.

时长: 07:45

USB4 Webinar

View our USB4 Compliance and Characterization Test webinar to learn how you can address the measurement challenges associated with the new USB4 standard.

时长: 22m 14s

USB4 Compliance Test Fixturing

Learn about changes to the official USB4 compliance test fixtures available from Wilder Technologies and the impact those changes will have on how tests are physically configured and what …

时长: 4:04

Long Duration Acquisitions for Jitter Analysis

For performing jitter analysis, typically the oscilloscope should acquire wave forms at the maximum sample rate. Learn about the ramifications of having the horizontal acquisition setup for …

时长: 04:10

Thunderbolt Automation Demo

Watch to view an introduction to TeKExpress Thunderbolt, our automation solution for Thunderbolt transmitter testing for Thunderbolt 3 and Thunderbolt 4.

时长: 05:53

USB4 Receiver Test Solution

Learn about our USB4 receiver testing solution which offers comprehensive coverage for compliance requirements outlined by the USB Implementers Forum or USB-IF to give you confidence that your …

时长: 6m 24s

PCI Express Gen 5 Stressed Eye Cal Demo

Watch PCIe Gen 5 Receiver Automated Test Solution and the CEM test application. The specification requires the stressed eye calibration to be carried out over an optimum channel and other adjusted …

时长: 05:01

PCIe Gen6 SerDes Webinar

Watch our webinar on the latest Rev 1.0 requirements for validation of a 6.0 capable SerDes design including SNDR and RLM measurements of transmitters and stressed eye calibration for receiver …

时长: 56:53

PCI Express Gen 5 Receiver Test Webinar

Watch the webinar, PCI Express Gen 5: Solving 32 GT/s Receiver Compliance and Validation Challenges, to hear Tektronix’ David Bouse and Antritsu’s Hiroshi Saito offer insights into receiver …

时长: 52:15

Webinar: High Volume Optical Transceiver Validation

Learn about the current challenges in testing optical transceivers in a high volume manufacturing setting, and see a demonstration of a transceiver test system for PAM4 characterization using the …

时长: 34:04

2 Series MSO - Digital Channels

If you tend to look at a lot of digital signals but don't want to lose analog channels, then why not check out how easy the 16 digital channels are to use! See more today by adding them to your 2 …

时长: 1m 50s

2 Series MSO - Digital Pattern Generator

Serial data is everywhere in modern embedded circuits. What if you need to create a serial data stream but don't have a separate pattern generator? Not to worry - the 2 Series has one built-in …

时长: 2m 5s

Resolving Impedance Mismatch

Watch this video to learn more about impedance mismatch, which can cause the voltage that is displaying on the oscilloscope to be different than on the AFG.

时长: 3m 45s

PCIe Gen6 PAM4 Signaling

Prepare for the next PCI Express inflection point by viewing this discussion of validation requirements for PCI Express Gen6. We review newly introduced transmitter measurements including SNDR …

时长: 61:49

TekExpress DDR Automation Introduction

Get a high level look at TekExpress DDR Automation Testing Solution for system level testing of DDR5/LPDDR5. We show how to enter device definition, electrical and timing parameters to measure …

时长: 5:39

Double Pulse Testing - Energy Loss Measurements

The switching performance of power semiconductors is often characterized using double pulse tests. This testing is now being widely applied to GaN and SiC MOSFETs. This video explains how to use …

时长: 7 minutes

How to Setup Raspberry Pi to Remotely Control the 2 Series MSO

Watch this short video to see how to use the Raspberry Pi as a remote control PC for test automation with the Tektronix 2 Series MSO Mixed Signal Oscilloscope and Python language.

时长: 3m 50s

112 Gb/s Ethernet Demonstration with Synopsys Transmitter PHY

With the approaching ratification of 802.3ck, electrical characterization needs are particularly increasing. This demo highlights next-generation testing for end-to-end characterization of a 53 …

时长: 2:08

ECOC 2022 IEEE 802.3ck Solution

Watch Tektronix’ Pavel Zivny and Ali Emsia at the ECOC 2022 Ethernet Alliance booth as they discuss an 800G link based on an IEEE 802.3ck 100G per lane standard and measured by the Tektronix …

时长: 2:04

View and save oscilloscope waveforms on your computer

Being able to easily collect waveform data from your oscilloscope is essential when performing a variety of applications. Fortunately, there many options to export data from your TBS2000B and then …

时长: 1m 56s

Webinar: Automotive Wired and Wireless & RF Communication

Learn about the domain/zonal controllers and discuss what changes it will bring for in-vehicle network architectures, highlighting some of the testing challenges measurement requirements.

时长: 57:08

Tektronix Automotive Radar

When making radar measurements, it is critical to have synchronous measurements by a single digitizer. Watch our short video in which Alex Krauska, Solutions Engineer, demonstrates making four …

时长: 2m 12s

MIPI C-PHY D-PHY Webinar

MIPI alliance standards have been driving the adoption of newer features and higher data rates for emerging mobiles applications. Oscilloscope-based protocol layer validation enables isolating …

时长: 31:33

Automotive Ethernet PAM3 and Signal Separation Introduction

Automotive Ethernet with PAM3 introduces new test challenges. Tektronix' new, innovative, non-intrusive Signal Separation simplifies Automotive Ethernet testing and set-up, providing advanced …

时长: 0h 8m 3s

TekExpress Demo Multigigabit Ethernet

A demonstration of TekExpress Automotive Ethernet, an automated application, for Automotive Multigigabit Ethernet (IEEE802.3ch) Compliance Testing.

时长: 6:56

Spectrum View for Mixed Domain Analysis

The 4, 5 and 6 Series MSO Oscilloscopes employ dedicated digital downconverters on all channels that operate independently of time-domain sample rate and record length and enables their Spectrum …

时长: 29:31

FLR Probe Tips for DDR and LPDDR Applications

Flex Long Reach Solder Down (FLR) Probe Tips from Tektronix have an increased length to provide a longer reach to the target from the probe connection. A primary use case for these FLR tips is …

时长: 3:20

TekScope V1.44 - What's New

Watch this video learn about the new features in TekScope version 1.44, including RF analysis capabilities, added support for the MSO2000 and MSO2000B oscilloscopes, user interface improvements …

时长: 8m 8s

The Team Behind the 2 Series MSO

How did our engineers manage to fit the capability of a full-functioning scope into such a small form factor? Watch and listen as our engineers talk about their experience delivering the NEW 2 …

时长: 5m 48s

License Install on DPO-MSO70000 C/DX/SX Oscilloscopes

Learn how to install a license, either fixed or floating, on DPO/MSO70000C, DPO/MSO70000DX and DPO70000SX oscilloscopes.

时长: 2:38

How to Get the Most Out of Your Touchscreen Oscilloscope

Touchscreen oscilloscopes are making their way into labs, workshops and classrooms. While their intuitive interfaces makes setting up and making measurements easier than ever, an understanding of …

时长: 39m 10s

USB 31 Rx Testing Features Updates

This video highlights some of the newest features and capabilities of the USB 3.1 Receiver testing application. These updates enhance the functionality of the software, and give users more tools …

时长: 5m 25s

USB 31 Rx Margin Test

The USB 3.1 Receiver application's Margin Test feature gives engineers quantitative answers on a design's performance and as a debug tool, a better understanding of where devices fail. This video …

时长: 3m 34s

USB 31 Rx Link Training Status State Machine

This video focuses on the Link Training Status State Machine UI feature of the USB 3.1 Gen2 Receiver test application and shows the path that is taken by a device being trained into loopback mode …

时长: 4m 35s

USB 31 Rx Calibration and Testing Setup

The physical setup for USB 3.1 receiver calibration and testing is shown in this video.

时长: 4m 33s

Time Correlated, Multi-Channel Analog/Digital/RF Signal Analysis Workshop

In this workshop, Tektronix Senior Applications engineer Alan Wolke demonstrates how to perform time correlated multi-domain signal analysis across multiple channels with the Tektronix 6 Series B …

时长: 34:07

The Basics of an Oscilloscope Trigger

For new engineering students, gaining a quick understanding of fundamental concepts is an important step in the learning process. This video uses plain language and clear visual examples to define …

时长: 4m 31s

PAM4 Debug and Validation on Real-Time Oscilloscopes

Overview of system with DPO70000SX system for both electrical and optical PAM4 solutions.

时长: 2m 16s

Optical Probing and Measurements with a Real-time Oscilloscope

Prepare for the new challenges in optical networking. During this webinar, experts will address critical design issues posed by integrating optical PAM4 capabilities into optical networking …

时长: 48m 56s

How to Measure Current with an Oscilloscope

An oscilloscope is typically set up to measure voltage versus time. But you can configure the oscilloscope to measure current as well. This video shows two very simple methods of using the …

时长: 1m 32s

Built-In Education Features of the TBS1000C and TBS2000B oscilloscopes

Oscilloscopes are often used in educational settings, and our TBS1000C and TBS2000B oscilloscopes includes many features that come standard. Watch this video to learn about the many ways that the …

时长: 1m 51s

Advanced Power Measurements with Tektronix Oscilloscopes and Picotest Accessories

This Picotest video gives a quick overview of the many power-related measurements that can be made using a Tektronix oscilloscope and Picotest accessories. Advanced power supply tests, such as …

时长: 1m 49s

400G-ZR Test Solutions

Overview of the Tektronix 400G-ZR Coherent Optical Modulation Analyzer.

时长: 3m 19s

Enhance the Education Experience

Prepare future engineers for tomorrow's exciting challenges by giving them the latest skills and knowledge they need for life beyond the classroom, including hands-on experience with real-life …

时长: 1m 38s

DPO70000SX Oscilloscope Performance Video Series Wideband RF

This video shows the strength of the DPO70000SX Oscilloscope for Wideband RF measurements with great noise density and low EVM measurements. See the performance of the DPO70000SX for yourself!

时长: 2m 16s

DPO70000SX Oscilloscope Performance Video Series Jitter Noise Floor

The DPO70000SX Oscilloscope has very good jitter noise floor. This is important when making critical timing margin measurements on fast devices or silicon. In this video we will see what the Time …

时长: 1m 50s

100G Link Training Tool for Debugging Datacenter Technologies

Watch this video to get an overview of the new Link Training Tool, which forms part of the expanded analysis software for Tektronix DPO70000SX oscilloscopes. Link Training helps engineers to …

时长: 1m 31s

Tektronix Innovation Breakthrough Asynchronous Time Interleaving

See the latest example of Tektronix history of innovation with this informative video as CTO Kevin Ilcisin discusses the expected benefits of newly patented Asynchronous Time Interleaving being …

时长: 4m 56s

Power Integrity Demo at embeddedworld2019

Are you seeing ALL the noise from your power rails? Lee Morgan, Technical Marketing Manager in EMEA, demos one of our power integrity setups with a 6 Series MSO, our new Power Rail Probes, and an …

时长: 0h 1m 27s

ECOC 2016 THz Communications Using Photonics

This demonstration of THz wireless transmissions is in collaboration with research professors from the Institute of Electronics, Microelectronics and Nanotechnology in France, who are performing …

时长: 2m 58s

6G MIMO Research

Prof. Dr. Ullrich Pfeiffer of Wuppertal University explains why his team chose Tektronix for their 6G research into making possible increased data rates using multiple channels and balancing speed …

时长: 0:58

Wide Bandgap Applications

Wide Bandgap power devices (SiC and GaN) offer significant benefits and are smaller, faster and more efficient than their silicon counterpart. But they also present several validation challenges …

时长: 24:07

Using SDLA Visualizer

Learn how to open closed eyes using equalization techniques and how to de-embed reflections and loss caused by the measurement setup using SDLA Visualizer for Tektronix Real-Time Oscilloscopes.

时长: 30m 56s

Understanding Differences between PCI Express 4050 and IEEE High Speed Electrical Specifications

Our Tektronix domain experts, Dan Froelich and Pavel Zivny, contrast the methodologies of the PCI Express 4.0/5.0 and IEEE 26 GBd NRZ/PAM4 electrical specifications and engage in a lively …

时长: 1h 1m 36s

Tips, Tricks, and Traps - Sharing Test Data across the Bench and into the Cloud Webinar

This webinar compares different methods of untethering your instrument data from your bench. Accessing your data locally and remotely is discussed, from custom Python code to automatic cloud …

时长: 46m 31s

TekDrive Scope Collaboration in the Cloud Webinar

TekDrive is a file sharing platform for storing, sharing, and collaborating on waveform and analysis data in a much more convenient, efficient, secure, and useful way. In this webinar, you will …

时长: 47m

PCI Express Gen 4 and Gen 5 Transmitter and Receiver Validation

PCI Express I/O bandwidth has doubled every 3 years on average thereby leading to an increased demand for this full duplex high speed bus architecture. As the industry begins deploying the 5.0 …

时长: 50:45

PCI Express Panel TIF 2022

Watch as experts from Anritsu, Synopsys, and Tektronix participate in a panel discussion on the evolution of SerDes validation. They also offer an overview of the new tools and measurement …

时长: 51m 23s

Webinar: PAM4 Optical Transceiver Characterization

Watch as we discuss PAM4 optical transceivers, both 100G and 400G, including the latest on standards, testing, and characterization. We cover high throughput NRZ measurement and margin and compare …

时长: 1:00:07

PAM4 Electrical Webinar

The accelerated development of 400G Ethernet technology is driving new requirements through the test community as it relates to measuring electrical PAM4 systems. This presentation will review …

时长: 1h 12s

NBASET and IEEE8023bz Technology and Measurements

The rapid growth of ever-more powerful mobiles devices, and the adoption of new wireless technologies such as 802.11ac, has enterprise networks struggling to keep pace. To meet these rising …

时长: 27m 16s

Navigating the Road to WiGig

This webinar features Tektronix expert, Dorine Gurney, sharing her insights on the key factors to consider when performing transmitter testing to IEEE 802.11ad. Topics covered include:• What are …

时长: 24m 54s

Solving Key LPDDR5 DRAM Test Challenges

Watch the webinar, How to Solve Key LPDDR5 DRAM Test Challenges, for test tips and techniques to meet the design challenges posed by this mobiles memory standard.

时长: 45:30

How to Get the Most Out of Your Oscilloscope

Found in labs and workshops across a diverse range of engineering professions, modern oscilloscopes are faster, more precise and more affordable than ever. Many people new to oscilloscopes can be …

时长: 46m 26s

How to Address Your Toughest Serial Bus Design Challenges with EDA and Measurement Correlation

This Tektronix webinar will teach engineers how to use modeling tools to correlate simulations with high-speed physical layer measurements on Serial Bus Standards using the DPO/MSO70000 Series …

时长: 27m 39s

HDMI 2.1 Test Challenges

HDMI specification version 2.1 is the most recent update of the HDMI standards and supports a range of higher video resolutions and refresh rates, including 8K60 and 4K120. Watch this …

时长: 21:02

Getting to PCI Express Compliance Faster

As design margins shrink, accurate and standard-specific measurement is key to debugging, verifying design and performing interoperability testing when designing PCIe devices. Having confidence in …

时长: 53m 34s

Effective Optical Test Strategies for 400G Optical Standards

This webinar discusses how designers and test engineers can determine the most effective optical test strategies for 400G Optical Standards. Learn where PAM-2 and PAM-4 fits, PAM-4 specific Mask …

时长: 36m 10s

Digitizers and Software for High Energy Physics

Watch as we demonstrate the use of digitizers having high signal integrity and software being used to reliably enable single shot and high-energy physics tests.

时长: 41:56

DDR5 Memory Characterization

While they promise to provide datacenters with large amounts of data at faster speeds and lower power consumption, DDR5 memory devices have unique test challenges. Learn about characterization …

时长: 17:55

Characterizing Coherent Optical Systems Webinar

Learn about the coherent modulation being considered for 400G networks, the key building blocks of a coherent test system, how to optimize measurement accuracy and the benefits of customizable …

时长: 42m 47s

Addressing PCIe Gen1-5 Test and Debug Challenges with Confidence

Learn how to address the test and measurement challenges posed by PCIE Gen1-5 for both base silicon testing and CEM compliance testing. Gain insights and solutions for automation, validation, and …

时长: 41m

5G Vector Analysis MIMO-OTA Webinar

Webinar on applications and trends and solving problems making measurements in 5G MIMO using a scope for wideband analysis. A demonstration shows time and frequency correlation for a power …

时长: 35:33

400G-ZR/ZR+ Next Generation Datacenter Technology

Get a view into next generation datacenter technology. After an overview, we dive into the signal analysis of coherent links.

时长: 24m 53s

400G Networking and 28GBd56GBd Testing Are you Ready

With PAM4 moving into production and 400G design efforts in full swing, the test challenges around characterization, verification and debug, and manufacturing testing have never been greater. This …

时长: 18m 33s

WIGIG CASE STUDY

Find out how the Tokyo Metropolitan Industrial Technology Research Institute (TIRI) reduced their testing time of wideband signals like IEEE 802.11ad with the Tektronix DPO70000SX. Previously …

时长: 3m 43s

Using TekScope to Decode Serial Data on a TBS1000C Oscilloscope

Watch this short video to learn how to use TekScope Software to decode serial data on a TBS000C Oscilloscope in just a few simple steps and then view the decode in a data stream or in a table …

时长: 1m 38s

Using the Deskew Tool

The UltraSync architecture provided with DPO70000SX series oscilloscopes allows you to connect two or more oscilloscopes together to easily add acquisition channels while maintaining channel-to …

时长: 4:59

Tips and techniques for setting up your Tektronix 4 Series, 5 Series or 6 Series MSO display

Watch how easy it can be to setup and analyze waveform behavior using the highly intuitive touch interface. Setting up your measurement and debugging your system has never been easier with the …

时长: 1:51

Practical techniques workshop for Mixed Signal Oscilloscopes

Tektronix Sr. Applications Engineer Alan Wolke leads a workshop on practical tips and techniques for Mixed Signal Oscilloscopes using the Tektronix 6 Series B MSO. - How to remotely access your …

时长: 37:32

Power Supply Rejection Ratio on an Oscilloscope

Learn how to get optimal results from your power supply design by checking the power supply rejection ratio. This video covers how DC-DC converters or low voltage drop-out regulators (LDOs) …

时长: 0h 8m 55s

Making Power Rail Measurements

See the ultra-low noise performance of the TPR4000 Power Rail Probe, and how it can be used for measuring DC power rail noise in microvolts, especially when paired with the 6 Series MSO …

时长: 0h 6m 15s

How to Use Oscilloscope Visual Triggers Build complex waveform triggers simply by drawing shapes

Learn how to quickly capture bursts just by drawing a couple of boxes, and how to apply logic and add more shapes to capture increasingly complex waveforms. See how visual triggers work on the 5 …

时长: 4m 5s

How to use Callouts on the 4 Series, 5 Series and 6 Series Mixed Signal Oscilloscopes

Learn how to annotate test results and methods with “Callouts” for easily documenting important information when sharing data across a team, recreating a measurement at a later date, or delivering …

时长: 1:42

How to change the font size on the 4 Series, 5 Series or 6 Series MSO display

Watch how to easily change the font size used on your 4/5/6 Series MSO with just a few clicks. This will make it easier to read measurement values at a distance from your scope or maximize the …

时长: 1:27

How to get up and running with SignalVu-PC on the 5 and 6 Series MSO

Learn how to configure and get started with SignalVu-PC software and 5 and 6 Series MSOs for vector signal analysis.

时长: 2:42

Finding anomalies on a 6 Series B MSO Oscilloscope

Learn how fast waveform update rates help uncover intermittent signal anomalies, and advanced triggering and search techniques can determine how often they occur. For more information on the new …

时长: 2m 6s

DPO70000SX Oscilloscope Performance Video Series Improving Measurement Accuracy with External Attenu

This video highlights the benefits, and proper use, of external attenuation with the 70GHz DPO70000SX Series Oscilloscope. See how measurement signal fidelity can be improved with easy-to-use …

时长: 4m 27s

DPO70000SX Oscilloscope Performance Video Series Spurious-Free Dynamic Range

This video shows the spurious-free dynamic range on the DPO70000SX Oscilloscope. Illustrated is how the scope’s dynamic range is performing using 40GHz tones sent into the instrument on a 5GHz …

时长: 2m 37s

Analyzing turn on behavior of a spread spectrum clock with Spectrum View on 4, 5 and 6 Series

See how Spectrum View provides ease-of-use and the ability to achieve optimal views in both RF and Time domains simultaneously when analyzing the turn on behavior of a spread spectrum clock. This …

时长: 2:32

Analyzing Frequency Response with a 2 Series MSO and AFG31000

This video demonstrates how to analyze the frequency response of an inverting amplifier circuit using Keithley KickStart Software, a Keithley 2220-30-1 Dual-Channel Power Supply, a Tektronix …

时长: 5m 39s

2 Series MSO - TekDrive Recall Scope Setup

Have you ever been asked to setup another user's oscilloscope? What if that user is not in the same lab? TekDrive allows the sharing of not just data, but also oscilloscope setup. Watch how …

时长: 1m 46s

2 Series MSO - TekDrive Session Share

If you work remotely from your colleagues, sharing data seamlessly is vital. Watch how TekDrive allows you to share test data with anyone and anywhere, even if the other person doesn't have an …

时长: 1m 37s

2 Series MSO - Stacked vs. Overlay Mode

Having multiple traces on the same screen can take time to accurately setup. See how the 2 Series MSO makes use of its 'Stacked' mode to not only saves time setting up each trace, but also allows …

时长: 1m 29s

2 Series MSO - Mask Testing

Wondering if your signal is within a certain tolerance? Take a look at the mask testing feature of the 2 Series MSO, and see how easy and effective it is to setup.

时长: 1m 14s

2 Series MSO - Remote Control VNC

Want to remote control your oscilloscope from another room, city or even country? The 2 Series MSO has a built-in VNC server that is fluid and convenient. Watch how easy it is to setup in under a …

时长: 1m 12s

2 Series MSO - RS232

Serial data is everywhere in modern embedded circuits, and, while this mature bus isn't as prevalsent as it once was, there is still plenty of usage. See how easy it is to decode it into ASCII with …

时长: 1m 5s

2 Series MSO - Runt Trigger

Advanced triggering is a must for any modern oscilloscope. Changing trigger modes on the 2 Series MSO is just a few taps of the screen. Take a look at the highly useful runt trigger and see how …

时长: 55s

2 Series MSO - Search Functionality

Serial data debug is a common job to be done. What if you needed to search through a data stream? The 2 Series MSO can do this for you. Watch how easy and fast you can do this on an I2C data …

时长: 1m 10s

2 Series MSO - CAN Decode

Decoding CAN differential doesn't always mean you need a differential probe. See how easy it is to deocde via the maths channel on the 2 Series MSO.

时长: 1m 13s

2 Series MSO - Callouts

Watch how easy it is to make notes on the screen & traces of the 2 Series MSO. It's perfect if you are sharing your test results or producing reports on your debug findings.

时长: 1m 18s

2 Series MSO - Built-in AFG

Having the ability to generate signals into your design is very useful. Take a look at how easy it is to not just generate standard signals, but also recall custom waveforms with the 2 Series MSO …

时长: 1m 6s

2 Series MSO - Cursors & Measurements

Making accurate measurements on an oscilloscope is vital. The 2 Series MSO has built-in automated measurements and easy to control cursors that provide confidence in your measurements.

时长: 1m 34s

User Defined Mode Demo

Watch as we demonstrate the “User Defined Acquisition Mode” feature included as part of Tektronix's TekExpress DDR5 and LPDDR5 testing solution. With the User-Defined Acquisition Mode, or UDA, a …

时长: 04:46

THS3000 Series Handheld Oscilloscope Virtual Product Demo

时长:

THS3000 Series Handheld Oscilloscope Virtual Product Simulation

时长:

TekScope Datalogging

TekScope PC software, combined with Tektronix oscilloscopes, makes it easy to log waveform data, waveform images and measurements on your PC. Simply set the logging interval, count, and hit Start …

时长: 5m 29s

TDR Measurements for Power Integrity

See how you can use TDR (Time Domain Reflectometry) techniques to better understand power integrity issues and more quickly eliminate issues, like ripple, from your system designs.

时长: 25:29

TekScope Software for Entry Level Oscilloscopes

Learn how using TekScope software together with entry-level oscilloscopes enables far greater insight into the data captured and far more powerful analysis and sharing capabilities than might be …

时长: 21:00

Spectrum View Spectrum Analysis and How it Differs from Traditional Oscilloscope FFTs (1 of 3)

The 4, 5 and 6 Series MSO Oscilloscopes employ dedicated digital downconverters on all channels that operate independently of time-domain sample rate and record length. This enables their Spectrum …

时长: 3:35

Triggering on RF Frequency Changes with Spectrum View Spectrum Analysis (3 of 3)

See how Spectrum View's triggering functionality can be used together with the independent control of time and frequency domains to capture infrequent anomalies. Additional videos: Spectrum View …

时长: 7:19

Using Spectrum View Spectrum Analysis on Multiple Channels (2 of 3)

For complex troubleshooting, Spectrum View is available on multiple channels. With all Spectrum Time indicators locked and moving together you can see time correlated spectrums across all …

时长: 4:56

Improve Waveform Quality with Pre-Compensation

See how the pre-compensation feature found on Tektronix Arbitrary Waveform Generators can correct for the negative effects of cables, components, and fixtures on the amplitude and phase of high …

时长: 6:05

OFC 2017 - PAM4 Debug and Analysis with Real Time Oscilloscope

This video highlights the benefits of using the DPO70000SX real time oscilloscope-based system for 400G optical/electrical PAM-4 debug and analysis.

时长: 4m 3s

MIMO Processing for Beamforming Analysis

See how the 4, 5, and 6B Series of MSO oscilloscopes provide a platform for multichannel test and measurement of MIMO systems through extension of MATLAB® algorithms for analysis of channel …

时长: 24:54

Low Noise Signal Acquisitions Take Center Stage at ECOC 2015

John Calvin puts the latest oscilloscope technology to work. The DPO70000SX oscilloscopes allows engineers to capture and measure high-frequency signals more accurately than possible with …

时长: 3m 24s

Looking at Analog, Digital and Serial Data Simultaneously with a 6 Series B MSO

See how a 6 Series B MSO can display a decoded serial bus, analog waveforms, and digital timing information for a rich view of your systems. This video shows a decoded SPI bus. For more …

时长: 2:06

Making VNA Measurements Confidently

Get tips on measuring sub-milliohm impedance on a board at low frequencies across surface mount capacitors. See how this VNA measurement is made using a Tektronix 6B Series MSO oscilloscope …

时长: 15:36

INDUSTRY BEST RESIDUAL EVM MEASUREMENTS FOR IEEE80211AD TESTING

Tektronix introduces the industry’s most accurate and repeatable single box solution for characterizing and debugging IEEE802.11ad transmitter PHY for silicon and systems. In this IEEE802.11 …

时长: 3m 47s

Interoperability is Key

At OFC 2018 it’s not just about speed but also interoperability both between standards and among equipment vendors. Here Tek’s Pavel Zivny showcases a demonstration system with a Tektronix DSA8300 …

时长: 3m 27s

High Speed Serial and Jitter Test for 6 Series B MSO

This demonstration shows the very quick jitter summary on the 6 Series B MSO, which includes an eye diagram, TIE histogram and spectrum, and bathtub plot. For more information on the new 6 …

时长: 01:58

ECOC 2016 Stable triggering on a 32 Gigabaud Signal

At this ECOC 2016 Demo Station, we're looking at generating a 50+ Gigabaud Optical Signal and also how our DPO70000SX oscilloscope enables a stable trigger on a 32 Gigabaud signal.

时长: 2m 49s

ECOC 2016 Optical Communications Up To 80 Gigabaud

Learn how new software features of the Tektronix OM4000 series, which enable multiple optical modulation analyzers to be combined, are enabling research into higher fiber optic transmission …

时长: 3m 2s

ECOC 2016 400 Gig Test Station

Watch a demonstration of the first working version of TDECQ that can operate on a 64 gigabit per second DR4 signal.

时长: 1m 49s

Demonstration of Automated Automotive Ethernet Compliance Test System

Test automation may be used to check automotive Ethernet transmitters for compliance with the BroadR-Reach, 100BASE-T1 (P802.3bw), and 1000BASE-T1 (802.3bp) standards. This demonstration shows the …

时长: 0h 4m 52s

Demonstration of Low Noise and High Resolution of 6 Series B MSO

This demonstration shows the clean capture of a small detail with extremely low noise, even on a signal that spans hundreds of volts. For more information on the new 6 Series B MSO visit here.

时长: 01:54

Cross-Domain Troubleshooting

Watch this demonstration showing how the 6 Series B MSO oscilloscope offers the industry’s best solution for debugging with the ability to optimize fully correlated RF (spectrum) and time-domain …

时长: 4:38

Prepare for DDR5 Test Challenges

DDR5 memory pushes the limits of high-speed signaling and tackles the bandwidth challenge imposed by the exponential growth of data generation. See the latest characterization and debug techniques …

时长: 2:46

5G New Radio Vector Signal Analysis

Watch to learn how you can simplify several 3GPP 5G New Radio transmitter tests. You’ll see how to verify transmitter characteristics including power, power dynamics, signal quality and RF …

时长: 8:50

5G Validation and System Debug

Learn how to perform multi-domain signal analysis of 5G base station and user equipment systems. See the benefits of using a mixed domain oscilloscope for analyzing RF amplifier performance. …

时长: 6:47

5G Over the Air Measurement

See how MIMO analysis of RF, analog and digital can be performed simultaneously for easy analysis and correlation between both the frequency and time domain while addressing the unmet needs of the …

时长: 51:53

100G-400G PAM4

See 100G/400G Real-Time and Equivalent Time oscilloscope solutions that enable seamless transition across your workflow. From product R&D and debug to design validation and production test – see …

时长: 3m 38s

2 Series MSO - Stand Configurations and Options

Watch this short video to see the different configurations for mounting the 2 Series MSO on its stand, the stability provided by the elastomer base, and the options for mounting the unit on a …

时长: 4m 34s

2 Series MSO Reveal at Oregon State University

Watch the reactions and hear the comments of Oregon State University students as they see and have the opportunity to use the 2 Series MSO Mixed Signal Oscilloscope for the very first time.

时长: 2m 31s

Channel-to-channel Phase Measurements using a 4, 5 or 6 Series MSO

This quick demonstration shows in real-time how phase relationships change based on the relative position of antennas. The phase-coherent digital downconverters (DDCs) in a 6 Series MSO …

时长: 2:09

TekScope Version 1.40 - What's New?

Watch this video to learn about the new features in TekScope version 1.40, including continuous acquisition, license expiration notification, and IMDA-MECH and WBG-DPT in the pro automotive and …

时长: 7m 19s

米乐m6网页版登录入口