237-BAN-3A Triax to Banana Plug: Triax cable center conductor terminated in a safety banana plug (guard and shield open). For connecting DMMs and other banana jack instruments to a matrix or fixture.
For use with: 4200A-SCS, 7072, 7072-HV, DMMs

 

237-BNC-TRX: Male BNC to 3-lug female triax adapter (guard disconnected). Terminates triax cable in BNC plug.High voltage rating for use with 7072-HV.
For use with: 4200A-SCS, 6517A, 6517B, 7078-TRX cables

 

237-TRX-BAR: 3-lug triax barrel (female to female) for use with triax interconnect.
For use with: 2635B, 2636B, 4200A-SCS, triax interconnect

 

2600-TRIAX: Triax adapter for a single Series 2600B SourceMeter channel (two needed for use with 2602B and 2612B).For use with standard 3-lug triax cables.
For use with: 2601B, 2602B, 2611B, 2612B

 

2657A-LIM-3: Low Interconnect Module for use with 2657A, HV triax cables (3 kV rated).
For use with: Series 2657A

 

2657A-PM-200: 200V protection module to protect standard triax instruments from 2657A, standard and HV triax cables (3 kV rated).
For use with: Series 2657A

 

3730-ST: Screw Terminal Block.
For use with: 3730

 

3731-ST: Screw Terminal Block.
For use with: 3731

 

3732-ST-C: Screw Terminal Block.Enables screw terminal access and additional matrix sizes including: quad 4×28 (1W), dual 4×28 (2W), single 4×56 (2W), dual 4×56 (1W), and single 4×112 (1W).
For use with: 3732

 

7703-306A: DB50 male connector kit (solder cup) with shell.
For use with: 7701, 7703, 7705, 7709

 

7709-308A: DB25 male connector kit (solder cup) with shell.
For use with: 7701, 7707, 7709, Series 2600B

 

8620 Four-Wire DMM Shorting Plug: Provides a low resistance 4-wire short to both observe and cancel DMM offset resistances and voltages to improve measurement accuracies.
For use with: All DMMs, Series 2400, Series 2700, Series 3700A

 

CS-701: BNC tee adapter (female, male, female).
For use with: 4200A-SCS

 

CS-719: 3-lug triax jack receptacle.
For use with: 4200A-SCS

 

CS-846: Eight position connector with screw terminals for connection to test leads.
For use with: 230x, 2510, 2510-AT

 

CS-1247: SMA female to BNC male adapter
For use with: 4200A-SCS

 

CS-1592-2: 2-pin male screw terminal connector plug. Rated 50 A. Mates with the CS-1626-2 screw terminal block.
For use with: 2651A

 

CS-1626-2: 2-pin female screw terminal connector block. Rated 50 A. Mates with CS-1592-2 screw terminal connector.
For use with: 2651A

 

237-TRX-T: 3-slot male to dual 3-lug female triax tee adapter for use with 7078-TRX cables and 7072/7072-HV Semiconductor Matrix Cards. High voltage rating for use with 6517B Electrometer.
For use with: 4200A-SCS, 6517A, 6517B, 7072, 7072-HV, 7078-TRX cables

 

237-TRX-TBC: 3-lug female triax bulkhead connector with cap for assembly of custom panels and interface connections. High voltage rating for use with 7072-HV, etc. Uses miniature coax cable, not triax cable, at soldered end.Bulkhead is outer shield.
For use with: 7072, 7072-HV, 7078-TRX cables

 

2188 Low-Thermal Calibration Shorting Plug: A low-resistance, low-­thermal shorting plug required to calibrate the 2182A Nanovoltmeter.Made of a LEMO connector with its pin connectors shorted together using copper wire and Sn/Ag4 silver solder.
For use with: 2182A

 

3706-BKPL: Analog backplane extender board, 15-pin D-sub to terminal block.
For use with: Series 3700A

 

3720-ST: Screw Terminal Block.Required with the 3720 for automatic CJC thermocouple measurements.
For use with: 3720

 

3721-ST: Screw Terminal Block.Required with the 3721 for automatic CJC thermocouple measurements.
For use with: 3721

 

3732-ST-R: Screw Terminal Block.Enables screw terminal access and additional matrix sizes including: dual 8×28 (1W), single 8×28 (2W), and single 16×28 (1W).
For use with: 3732

 

3740-ST: Screw Terminal Block.
For use with: 3740

 

7074-CIT: Contact extraction tool for removal of contacts from cables and connectors.
For use with: 7152-KIT, 7152-MTR

 

BG-18: Dual banana to BNC coaxial adapter for adapting connection on instrument with dual banana jack.
For use with: All DMMs, Series 2400

 

CAP-18: Protective shield/cap for BNC connectors.
For use with: BNC connectors

 

CAP-31: Protective shield/cap for 3-lug triax connectors.
For use with: 3-lug triax connectors

 

CS-400: DB25 male solder cup.
For use with: C126-1 cable, 213

 

CS-1249: SMA female to SMB plug adapter
For use with: 4200A-SCS

 

CS-1252: SMA male to BNC female adapter
For use with: 4200A-SCS

 

CS-1281: SMA female to SMA female adapter
For use with: 4200A-SCS

 

CS-1305: Interlock connector to mate with 6517B.
For use with: 6517B

 

CS-1629-8: 8-pin female cable termination block.
For use with: 2651A

 

CS-1638-12: 12-pin rear panel output connector.
For use with: 2200-20-5, 2200-30-5, 2200-32-3, 2200-60-2, 2200-72-1

 

2290-5-SHVBH: Panel mount connector for connecting a 2290-5 through a 2290-5-SHV cable to an enclosure.
For use with: 2290-5

 

2290-10-SHVBH 10 kV SHV Female Bulkhead Connector: Panel mount connector for connecting a 2290-10 through a 2290-10-SHV cable to an enclosure.
For use with: 2290-10

 

2600-KIT: Screw terminal connector kit with extra screw terminal connector, strain relief, and cover for a single SourceMeter channel (two needed for use with 2602B, 2612B, and 2614B).
For use with: 2601B, 2602B, 2604B, 2611B, 2612B, 2614B, 2651A

 

3723-ST: Screw Terminal Block.Accessory for 3723 for two-pole applications.
For use with: 3723

 

3723-ST-1: Screw Terminal Block.Accessory for the 3723 for single-pole applications.
For use with: 3723

 

3724-ST: Screw Terminal Block.
For use with: 3724

 

7078-TRX-BNC: 3-slot male triax to BNC adapter for use with 7072 Semiconductor Matrix Card and 4801 cables.
For use with: 4210-CVU, 4801, 6482, 6487, 6514, 6517A, 6517B, 7072, 7072-HV

 

7078-TRX-GND: 3-slot male triax to female BNC adapter (guard removed) for adapting non-guarded measurements to the 7072 or 7072-HV Semiconductor Matrix Cards or 8006 or 8008 Test Fixtures.
For use with: Series 2600B, 4801, 6517A, 6517B, 7072, 7072-HV

 

7078-TRX-TBC: 3-lug female triax bulkhead connector with cap for assembly of custom panels and interface connections.
For use with: 7078-TRX Cables

 

CS-458: Interlock connector kit to mate with 6517-ILC-3.
For use with: 6517-ILC-3

 

CS-565: Female BNC to female BNC adapter with 50 Ω nominal impedance.
For use with: 4200A-SCS, BNC interconnect

 

CS-630: 3-lug female triax bulkhead connector for soldered connection.Mates with CS-631.
For use with: Fixtures, 6487, 6517A, 6517B

 

CS-631: 3-slot male triax cable mount connector for use with SC-22 cable.Mates to 7072 and 8006.
For use with: 4200A-SCS, SC-22 cable

 

CS-1390: Male LEMO triax to female SMA adapter.
For use with: 4200A-SCS

 

CS-1391: SMA tee adapter (femalemale-female)
For use with: 4200A-SCS

 

CS-1423-3: Miniature mating connector used as a ground connector for the 2635B and 2636B.
For use with: 2635B, 2636B

 

CS-1479: SMA male to BNC male adapter.
For use with: 4200A-SCS

 

CS-1655-15: 15-pin rear panel output connector.
For use with: 2200-30-1, 2220J-30-1, 2230-30-1, 2230J-30-1