gongjigongyi.com
与米乐m6网页版登录入口代表实时聊天。 工作时间：上午 9:00 - 下午 5:00（太平洋标准时间）。
电话
致电我们
工作时间：上午9:00-下午5:00（太平洋标准时间）
下载
下载手册、产品技术资料、软件等：
反馈
P6701B P6703B Optical to Electrical Converters Datasheet
P6701B & P6703B Datasheet
Small, conveniently packaged P6701B and P6703B optical-to-electrical analog converters provide an accurate interface for optical pulse shape measurements.
Features and benefits
- Broad Wavelength Response 500 to 950 nm or 1100 to 1700 nm
- High-bandwidth DC up to 1.2 GHz
- High Gain 1 V/mW
- Low Noise
- Probe Connects to DPO7000 1 and DPO/MSO70000 2 Series
- SONET/SDH and Fibre Channel Reference Receiver Performance:
- TDS500C/700C (Opt. 3C or 4C)
- P6701B – Fibre Channel up to 1063 Mb/s
- P6703B – SONET/SDH up to 622 Mb/s
1Requires the TPA-to-BNC adapter
2Requires the TCA-to-BNC adapter
Applications
- Eye Pattern Testing of Optical Communication Signals (SONET/SDH and Fibre Channel)
Product description
The Tektronix P6700 Series optical-to-electrical (O/E) converters change optical signals into electrical signals for convenient analysis on Tektronix DPO7000 and DPO/MSO70000 Series oscilloscopes with appropriate adapters (see footnote 1 and 2), any other Tektronix oscilloscope equipped with a TekProbe interface, or when used with the 1103 TekProbe power supply. The P6700 Series O/E converters are ideal for optical source characterization in the development, manufacture, or service of optical communication systems and devices.
Small, conveniently packaged P6701B and P6703B optical-to-electrical analog converters provide an accurate interface for optical pulse shape measurements. The high gain, large dynamic range, and stable output offset of these O/E converters make them ideal for performing eye pattern analysis and extinction measurements.
The P6701B/P6703B optical input is a 1 meter, 62.5μ Multi Mode fiber with an FC/PC connector. Using the standard assortment of hybrid fiber-optic mating sleeves, these O/Es can accommodate the various industry connector standards.
The TekProbe interface provides power, auto-scaling, auto-termination, and correct units (microwatts) when used with Tektronix DPO7000 or DPO/MSO70000 and earlier TekProbe-equipped Series oscilloscopes.
Performance you can count on
Depend on Tektronix to provide you with performance you can count on. In addition to industry-leading service and support, this product comes backed by a one-year warranty as standard.
The standard P6701B has a nominal frequency response which follows the fourth-order Bessel-Thompson for Fibre Channel 1063 Mb/s. The 1103 TekProbe power supply can be used to connect these products to the DSA8300 Series sampling oscilloscopes.
OC-3/STM-1 SONET/SDH Transmitter Eye Pattern Test
P6701B: Typical Wavelength-dependent Gain (at 25 °C)
P6703B: Typical Wavelength-dependent Gain (at 25 °C)
Specifications
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Probe overview
| Characteristic | P6701B | P6703B |
|---|---|---|
| Wavelength response | 500 to 950 nm | 1100 to 1650 nm |
| Bandwidth 1 (Typical) | DC to 1.0 GHz | DC to 1.2 GHz |
| Rise time (Typical) | ≤ 500 ps | ≤ 395 ps |
| Conversion gain | 1 V/mW | 1 V/mW |
| Maximum input optical power | 1 mW (0 dBm) 2 | 1 mW (0 dBm) 2 |
| 10 mW (10 dBm) 3 | 10 mW (10 dBm) 3 | |
| 20 mW (13 dBm) 4 | 20 mW (13 dBm) 4 | |
| Maximum output modulation depth for reference receiver performance | ≤ 200 mVp-p | ≤ 200 mVp-p |
| Noise equivalent power | ≤ 0.87 Noise Equivalent Power μW (RMS) 5 | ≤ 0.59 μW (RMS) 5 |
| ≤ 28 pW per √Hz | ≤19 pW per √Hz | |
| Maximum input fiber core diameter | 62.5 μm | 62.5 μm |
1Optical bandwidth (-6 dB electrical)
2Maximum average operating power
3Maximum average nondestruct
4Maximum peak nondestruct
51 GHz low-pass filter in series with the output
Ordering information
Models
- P6701B
- Optical-to-electrical Converter with FC/PC Connector
- P6703B
- Optical-to-electrical Converter with FC/PC Connector
- Both probes include:
- Hard case, Instruction manual (English), Certificate of Traceable Calibration, One-year warranty
Options
Service options
- Opt. C3
- Calibration Service 3 Years
- Opt. C5
- Calibration Service 5 Years
- Opt. D1
- Calibration Data Report
- Opt. D3
- Calibration Data Report 3 Years (with Opt. C3)
- Opt. D5
- Calibration Data Report 5 Years (with Opt. C5)
- Opt. R3
- Repair Service 3 Years (including warranty)
- Opt. R5
- Repair Service 5 Years (including warranty)
Power supply
- 1103
- TekProbe Power Supply. Please specify power plug when ordering.
60W-11304-10
Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.
