gongjigongyi.com

与米乐m6网页版登录入口代表实时聊天。 工作时间:上午 9:00 - 下午 5:00(太平洋标准时间)。

电话

致电我们

工作时间:上午9:00-下午5:00(太平洋标准时间)

下载

下载手册、产品技术资料、软件等:

下载类型
型号或关键字

反馈

电流探头

A621和A622产品技术资料

更多信息

在线阅读:

A621-A622-Current-Probes-Datasheet
A621和A622产品技术资料

The A600 Series current probes are specifically designed to support measurements with the TekMeter® or oscilloscope.

Features and benefits
  • A621
    • AC – 5 Hz to 50 kHz
    • 100 mA to 2000 A peak
    • For DMMs and oscilloscopes
    • Clamp on
  • A622
    • AC/DC – 100 kHz
    • 50 mA to 100 A peak
    • For DMMs and oscilloscopes
Applications
  • Motor drives
  • Inverters
  • Power supplies
  • Avionics

A621 2000 Amp AC Current probe/BNC

This industrial-style clamp-on probe has a BNC connector and can be used with a shrouded banana plug adapter1so it can be used on digital multimeters, TekMeter, and oscilloscopes. The A621 can measure AC currents from 100 mA to 2000 A peak over a frequency range of 5 Hz to 50 kHz. It provides a 1 mV, 10 mV, or 100 mV output for each Amp measured.

1For instruments with banana jack inputs, Tektronix part number 012-1450-00 Female BNC to banana lead adapter is required.

A622 100 Amp AC DC Current probe/BNC

This "long nose" style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. It has a BNC connector and can be used with a shrouded banana plug adapter1so it can also be used on digital multimeters, TekMeter, and oscilloscopes. The A622 can measure AC/DC currents from 50 mA to 100 A peak over a frequency range of DC to 100 kHz. It provides 10 mV or 100 mV output for each Amp measured.

Recommended products

TPS2000, TDS1000B, TDS2000C, and TDS3000C Series oscilloscopes and DMM40201, DMM40401, and DMM40501digital multimeters.

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Characteristic A621 A622
Frequency range 5 Hz to 50 kHz DC to 100 kHz
Maximum input current 2000 A peak 100 A peak
Output 1 mV/A, 10 mV/A, 100 mV/A 10 mV/A, 100 mV/A
Maximum conductor diameter 54 mm (2.13 in.) 11.8 mm (0.46 in.)
Termination BNC1BNC1
Maximum bare-wire voltage 600 V (CAT III) 600 V (CAT III)
Safety UL3111-2-032, CSA1010.2.032, EN61010-2-032, IEC61010-2-032  UL3111-2-032, CSA1010.2.032, EN61010-2-032, IEC61010-2-032 

Ordering information

A621
2000 A AC Current probe/BNC.
A622
100 A AC/DC Current probe/BNC.
Recommended accessories
012-1450-xx
Adapter, lead; discrete – MLD, 2, 18 AWG, dual insul, BNC, female X 4 mm dual insul; banana jack X dual insul plug, shield banana
Options
Service options
Opt. R3
Repair Service 3 Years (including warranty)
Opt. R5
Repair Service 5 Years (including warranty)